|
PowerwoRx e3
Buy PowerwoRx e3 for a Whole House Energy System
Three Key Benefits:
-
Energy Savings
-
Equipment Protection
-
Electrical Noise Filtration
PowerwoRx e3 provides energy savings by reducing the amount of power drawn from your utilities with the use of specially designed harmonic resistant capacitors.
PowerwoRx E3 systems optimize your home's power factor thus reducing the amount of energy your home's motor loads use such as air conditioners, refrigerators, freezers, washers, dryers, dishwashers, pool pumps, vacuum cleaners, furnace blower motors, fans etc. Motor loads (inductive loads) inherently require more energy to do their work compared to other electrical equipment in your home. The PowerwoRx E3’s “power factor optimization” significantly increases the efficiency of your motor load and stores waste energy resulting in decreased demand and usage of electricity from your utility company. This equates to significant cost savings for you the home owner.
Power factor is the measurement of how efficient your electrical system is using the energy delivered to your home from your utility company. For example, your stove and dryer heating coils and incandescent light bulbs have a “power factor rating” of unity or 1. This equipment converts electric energy to heat and light. Motor loads as described above can have “power factor ratings” as low as .2. This combination of electric loads in American homes results in an average “power factor rating” of .77 or less. The .77 indicates that your home is using more energy than it should to operate your electrical equipment. The PowerwoRx E3 technology has a proven track record of increasing a home’s “power factor rating” to .95 or better.
Equipment Protection
PowerwoRx E3 technology provides Surge and Spike Suppression, a feature that will help protect and extend the useful life of your electrical equipment. Voltage surges and spikes come from many different internal and external sources such utility grid changes, damaged transformers or electrical lines due to accidents or acts of God, old or outdated utility transformers that supply electrical power to your home, lightning and turning on and off major motor loads in your home.
Typical homes in the United States are bombarded with literally hundreds of surges and spikes a day that damage sensitive electrical equipment over time. A combination of the PowerwoRx E3 harmonic resistant capacitors and metal oide varistors (MOV’s) give the home owner the maximum protection available on the market today. The external lights on the PowerwoRx E3 system provide an easy visual indicator that the system is protecting your home.
Electrical Noise Filtration
PowerwoRx E3 technology provides Harmonic Filtration which has become more important since the 1980’s and almost mandatory going into the 21st Century due to the proliferation of computers, fax and copy machines and variable frequency drives which are known as “nonlinear loads”. “Nonlinear loads ask for and use electric current in “pulses” unlike traditional electrical equipment. This pulse use of electrical current creates damaging noise, interference and heat on today’s electrical systems causing interference within sensitive electrical equipment or worse causing them to overheat and fail. The use of computerized electronics within the American home has been growing at exponential rates and the need for filtering out the interference, noise and heat created by nonlinear loads has never been greater.
Installing the PowerwoRx E3 system in your home will reduce the need to produce electrical energy reducing the amount of coal and oil being burned to generate the electric energy resulting in the reduction of environmentally harmful emissions of carbon dioxide, nitrous oxide and sulfur dioxide.
Do your part by installing a PowerwoRx E3 today! For installation and commercial use information, contact Lisa Archer at 901-734-0555.
PowerwoRx
TM E3 “Clean Power System” Specifications
Unit Model CPS-E3
Power Line Voltage (VAC) 120/240
Phase Configuration single
Frequency (Hz) 50 -60
Power Dissipation (J)
(2ms current wave)
550J
Peak Pulse Current (A)
(8/20 microsecond current wave)
40,000
Maximum Clamping (V)
(@ 200A, 8/20 microsecond current wave)
340/690
Total Capacitance (μF) 30
Operating Temperature (°C) -40 to +70
Line Wires (AWG) 12
Circuit Breaker Required (A) 20
Dimensions (WxDxH) 3”x9”x5”
Weight (lbs.) 3
Frequently Asked Questions:
Does the PowerwoRx e3 work in any home?
Yes it does, as long as you have a circuit breaker panel with breaker switches and not the old screw in type fuses, the unit will work on any single-phase electric application for homes. If you say "yes" to only two or more of the following then you could be saving a significant amount of money on your electric bill right now!
Is your home over 2500 Square feet?
Is your central air conditioner / heat pump unit 3 years or older?
Is your forced air furnace 3 years or older?
Do you have a pool?
Do you have a well?
Do you use an air conditioner?
Is your refrigerator / freezer not EnergyStar rated?
Do you have more than one refrigerator / freezer?
Is your washer / dryer not EnergyStar rated?
Do you have a hot tub or a Jacuzzi?
Is your dishwasher not EnergyStar rated?
Do you have a number of appliances in your home?
Will the PowerwoRx e3 affect any of my appliances and their normal use?
No, if anything, your motors will run about 10% cooler, which is good for a motor because heat is the enemy of a motor.
Is the PowerwoRx e3 tested and approved by independent labs?
Yes, the PowerwoRx e3 is UL listed and tested. Also, the technology is recognized by the U.S. Department of Energy.
How much can I expect to save per month by using the PowerwoRx e3?
That depends on many factors. The size of your home, the amount of inductive motor load, and the amount you are paying per kilowatt-hour for electricity etc. However, generally speaking users of the product have seen up to 25% in reduced consumption, but the average savings is somewhere in the 8% to 15% range.
How long will it take for the PowerwoRx e3 to pay for itself?
Depends on your individual circumstances, number of appliances and age, electrical costs and usage patterns, but most units are paid for within 18 months-3 years.
Is the PowerwoRx e3 easy to install?
Yes, but the PowerwoRx must be installed by a licensed electrician. Installation requires opening up of the electrical panel, exposing potentially dangerous high voltage wires. The unit comes with complete installation instructions and installs in about 15-30 minutes.
How long will the PowerwoRx e3 last?
It has a predicted lifespan of over 20 years.
Why haven’t I heard of these products until now?
That’s easy - two words “cost effectiveness.” Until recently, electric rates throughout America were cheap, costing us 2, 3 or 4 cents per kilowatt-hour. Now, electric rates are 8, 10, 12, 14, and 19 and in some cases New York City is 22 cents per Kwh, and Hawaii is 33.5 cents per Kwh. At the cheaper rates the PowerwoRx e3 didn’t make sense, but at the current rates, it makes all the sense in the world.
What About PowerwoRx e3 for Surge Protection?
One of the most important features of the PowerwoRx e3 is the ability to protect the entire home against power surges. No longer is there a need for so many surge protectors in the home. The PowerwoRx e3 provides a broad range of protection for hardwired appliances and most home electronics such as appliances, televisions, satellite equipment, entertainment systems, etc. The unit protects from power line surges as well as spikes caused by internal wiring problems, loose connections and fluctuating demand from large motors such as vacuum cleaners, heating and cooling equipment, etc.
|
